If you’re in the market for a new dishwasher, you’ll want to take your time choosing the best model for your space and considering extra features like a third rack for flatware. But the next step is getting the dishwasher up and running, and that means installing or replacing the water, drain and electrical connections. You’ll need a few standard home improvement tools and the appliance’s installation manual to get started. Read the manual from start to finish, and make sure you’ve got all the materials needed before starting.
Dishwasher installation is a project that’s well within the capabilities of most do-it-yourselfers, but it does involve plumbing and electrical work. If you’re not confident you can complete this project safely, or if you don’t have the right tools on hand, consider hiring a professional to do the job. In addition to making sure the new dishwasher is properly connected, a pro can ensure that the plumbing follows local codes and won’t lead to leaks.
To begin, shut off the electricity to your dishwasher at your home’s breaker panel and the water supply line to your kitchen sink. You’ll also want to disconnect the drain hose from the old dishwasher and close any valves that are connected under your sink.
Open the box your dishwasher arrived in, and remove any shipping materials. Set aside a large piece of cardboard to protect your counter top during the removal process. With a helper, tilt the dishwasher on its back and remove the front access panel. If your dishwasher has a drip tray sensor, be sure to remove and save this part as well.
Using a drill, create holes for the drain hose and power cord in the cabinet wall behind the dishwasher. The hole for the drain hose should be placed well above the garbage disposal or sink tail pipe to prevent back flow of dirty water into the sink. Then, connect the drain hose to your dishwasher, and run the power cord through its terminal box (which is typically located underneath the rear legs of the dishwasher).
If your home has aluminum wiring instead of copper, you’ll need to call in a licensed electrician who’s experienced with working on this type of circuitry. Once all the electrical connections are made, it’s time to install the dishwasher and screw it to the countertop. Be careful not to over-tighten the screws, which can damage the countertop and cause a fire. When all is finished, turn on the dishwasher and test for leaks and proper operation. If you have any issues, consult your product’s manual for more detailed instructions on troubleshooting and repairs.
source https://flowlinkplumbing.wordpress.com/2023/07/22/dishwasher-installation-how-to-get-your-dishwasher-up-and-running/
No comments:
Post a Comment